Design And Prototyping Of Arduino Microcontroller-Based Vacuum Sucking Tools

Authors

  • Alexius Ulan Bani Universitas Bung Karno
  • Fifto Nugroho Universitas Bung Karno
  • Jefon Krisna Parell Marunduri Universitas Bung Karno

Keywords:

Arduino, Motor Driver, Ultrasonic Sensor, Dust Sensor, DC Motor, Servo Motor, Relay, Fan.

Abstract

Cleanliness is a very important factor for human life. Good hygiene will reflect a healthy lifestyle. Dust is one of the factors that affect the cleanliness of a room. a lot of dust and scattered on the floor will make the room dirty. In this study, an automatic vacuum cleaner will be designed to clean dust on the floor in a room. In designing and making prototypes of this Arduino microcontroller-based vacuum cleaner, it was designed in terms of hardware and software.The test results of the vacuum cleaner run well and properly, but the dust suction is not strong enough so that it is not optimal for sucking large or heavy dust.

Author Biographies

Alexius Ulan Bani, Universitas Bung Karno

Department of Computer Systems

Fifto Nugroho, Universitas Bung Karno

Department of Computer Systems

Jefon Krisna Parell Marunduri, Universitas Bung Karno

Computer Systems Study Program

References

Berto Nadeak, Abbas Parulian, Pristiwanto, Saidi Ramadan Siregar., (2016), Perancangan Aplikasi Pembelajaran Internet Dengan Menggunakan Metode Computer Based Instruction. Jurnal Riset Komputer Vol. 3 No. 4.

Budiharto, W., (2008) Panduan Praktikum : Mikrokontroler AVR Atmega16, PT. Elex Media Komputindo, Jakarta.

Departemen Pendidikan Nasional. (2005), Kamus Besar Bahasa Indonesia, Balai Pustaka, Jakarta.

Departemen Pendidikan Nasional. (2008), Kamus besar bahasa Indonesia, Gramedia Pustaka Utama, Jakarta.

Gatus, Sasi. (2007), Kiat Hemat Bayar Listrik, Penebar Swadaya, Jakarta.

Heri Andrianto, Aan Darmawan. (2016), Arduino Belajar Cepat dan Pemrograman, Informatika, Bandung.

Kadir, Abdul. (2018), From Zero To A Pro : (Edisi Revisi), Andi, Yogyakarta.

Suma’mur P.K., (2014), Higiene Perusahaan dan Kesehatan Kerja, Sagung Seto, Jakarta.

Murad. (2013), Membuat Diagram Dan Gambar Teknik Dengan Menggunakan Microsoft Visio 2003, Andi, Yogyakarta.

Sukamto, R. A., dan Shalahudin, M., (2014), Rekayasa Perangkat Lunak

Terstruktur Dan Berorientasi Objek, Informatika, Bandung.

Sukarjadi. Arifiyanto. Setiawan, Deby T. Hatta, M., (2017), Perancangan Dan Pembuatan Smart Trash Bin Di Universitas Maarif Hasyim Latif, Teknika : Engineering and Sains Journal, Politeknik Sakti Surabaya. pp. 101–110.

Syahwil, M., (2017), Panduan Mudah Belajar Arduino Menggunakan Simulasi Proteus, Andi, Yogyakarta.

Wirdasari, Dian. 2010. Membuat Program dengan Menggunakan Bahasa “C”,

Jurnal SAINTIKOM Vol.8 No.1 394-409.

Additional Files

Published

2022-04-15

How to Cite

Bani, A. U. ., Nugroho, F. ., & Marunduri, J. K. P. . (2022). Design And Prototyping Of Arduino Microcontroller-Based Vacuum Sucking Tools. Journal of Mathematics and Technology (MATECH), 1(1), 29–33. Retrieved from http://journal.binainternusa.org/index.php/matech/article/view/23

Issue

Vol. 1 No. 1 (2022): Journal MATECH (May 2022)

Section

Articles

License

Copyright (c) 2022 Alexius Ulan Bani, Fifto Nugroho, Jefon Krisna Parell Marunduri

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.

<p><a href="http://creativecommons.org/licenses/by-nc-sa/4.0/" rel="license"><img style="border-width: 0;" src="https://i.creativecommons.org/l/by-nc-sa/4.0/88x31.png" alt="Creative Commons License" /></a><br /><strong>MATECH</strong> This work is licensed under a <a href="http://creativecommons.org/licenses/by-nc-sa/4.0/" rel="license">Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License</a>.</p>